Securplumb Leadline 1/2″ x 7lb x 15mm

Product Overview:

The Securplumb Leadline 1/2″ x 7lb x 15mm is a high-quality plumbing adapter designed for secure and durable connections between legacy lead pipework and modern 15mm copper systems. Ideal for property upgrades and maintenance in older buildings, this leadline fitting facilitates the safe transition from traditional lead supply lines to standard copper installations in compliance with modern plumbing standards.

Engineered to precise specifications, the Securplumb leadline ensures watertight performance, corrosion resistance, and long-term reliability in both domestic and commercial applications. It is especially suited for renovation projects, public buildings, and historical properties where original lead piping may still be in place.

Product Specifications:

• Brand: Securplumb

• Product Type: Leadline Pipe Adapter

• Lead Size: 1/2″ x 7lb

• Copper Size: 15mm

• Connection Type: Compression fitting

• Material: Brass body with compression ends

• Boxed Weight: 145g

• Usage: For connecting 7lb lead pipe to 15mm copper

• Compliance: Meets UK plumbing regulations and standards

• Finish: Machined brass for corrosion resistance and strength

Key Features:

• Secure Adaptation: Designed to connect 1/2″ 7lb lead pipe to standard 15mm copper pipework

• Time-Saving Design: Compression fitting requires no soldering, making installation faster and cleaner

• Corrosion-Resistant: Brass construction withstands high moisture environments and ensures long service life

• Legacy Pipe Compatibility: Suitable for refurbishment of buildings with original lead pipe infrastructure

• Leak-Free Performance: Precision engineering ensures a tight, reliable seal under pressure

Typical Applications:

• Domestic plumbing upgrades in older properties

• Heritage or listed building renovations

• Commercial building plumbing where lead piping remains

• Emergency pipe repair where lead-to-copper transition is needed

• Water service line modernization

Installation Instructions:

Important: All work involving lead piping should be performed by a qualified plumber to ensure safety and compliance with water authority standards.

1. Inspect Pipework: Ensure the 7lb lead pipe is undamaged and properly prepared. Use a pipe liner if necessary.

2. Fit the Adapter: Slide the compression nut and olive over the copper pipe. Insert the lead pipe into the opposite end of the fitting.

3. Tighten the Joint: Hand-tighten the compression nuts, then use appropriate spanners to finish tighteningavoid overtightening to prevent damage.

4. Pressure Test: Once installed, test the system for leaks by turning on the water supply and observing for any drips or pressure loss.

5. Compliance Check: Confirm the installation adheres to local plumbing codes and lead pipe transition standards.

Care & Maintenance:

• Routine Checks: Periodically inspect the joint for signs of leaks or corrosion.

• No Harsh Cleaners: Clean with mild soap and water; avoid chemical cleaners which may degrade rubber seals.

• Replace If Damaged: Replace the fitting if the compression nut or pipe contact surfaces show wear or deformation.

• Professional Servicing: For major maintenance involving lead pipes, consult a qualified professional.

Frequently Asked Questions (FAQ):

Q1: What does 7lb lead mean?
“7lb lead” refers to the weight of lead per square foot, a common measure used historically in plumbing. It affects the wall thickness and outer diameter of the pipe, which this fitting is specifically designed to accommodate.

Q2: Can this be used on 1/2″ copper pipe instead of 15mm?
No. This fitting is specifically designed for 15mm metric copper pipes and 7lb imperial lead pipe. A different fitting would be required for 1/2″ copper.

Q3: Is this fitting WRAS approved?
Securplumb fittings are manufactured to meet UK plumbing regulations. Please confirm WRAS status with your local supplier if required for certification documentation.

Q4: Is it safe to leave lead pipes in place?
While lead pipes are no longer installed, many still remain in older buildings. This fitting allows a safe, secure transition to modern pipework, which may be required before full replacement.

Q5: Do I need any special tools?
Standard compression fitting tools (adjustable spanners or plumbing wrenches) are sufficient for installation. No soldering or heat is required.

Conclusion:

The Securplumb Leadline 1/2″ x 7lb x 15mm is a specialist plumbing component designed to bridge the gap between historical and modern systems. With its durable brass construction, precision engineering, and ease of installation, it ensures safe, leak-free operation while supporting property upgrades in compliance with current plumbing practices.

An essential tool for any professional plumber working on legacy systems, this adapter is a trusted solution for maintaining water safety and system performance during critical infrastructure transitions.