Proxxon Micro Mill FF 230

The MICRO Mill FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron, aluminum, brass and plastic. The headstock swivels through 360, indicated on a scale. Height is adjustable. One revolution equals 1/32″ (1mm) travel, 1 division equals .002″ (0,05mm). The quill and headstock may be locked in position, which is essential when milling. The powerful permanent magnet motor drives via a poly-v-belt, yielding high torques, especially at lower speeds.

The machine comes with three collets of 15/64″, 5/16″ and 25/64″ (6, 8 and 10mm). The solid table has a size of 10 5/8″ x 3 5/32″ (270 x 80mm) and is T-slotted to 15/32″ x 15/64″ x 13/64″ (the MICROMOT norm of 12 x 6 x 5mm).

Technical Data:

Speeds 280 – 550 – 870 – 1,200 – 1,500 – 2,200 RPM Table Size 10 5/8″ x 3 5/32″ (270 x 80mm) Column Size 1 3/8″ x 15 3/4″ long (35 x 400mm) X-Y Travel 6 11/16″ x 2 9/16″ (170mm x 65mm) Overall Height 20″ (500mm) Volts 110 – 120V AC, 60Hz Weight 41 lb. (17kg)

Important: For best results when milling, it is recommended to lock the headstock. This is easily done via the FF 230’s lock levers.