Alden Grabit Drill-Out Broken-Bolt Extractor #5007P
to remove 1/2″ and 12 mm

• Broken bolts and studs quickly and easily removed without damaging threads
• High quality H.S.S., heat treated and precision ground
• Suitable for removal of broken inch as well as metric bolts and studs

Use in reverse only while drilling and extracting.

Drill-out 4 piece extractor kit extracts broken bolts 1/4 inch – 1/2 inch in diameter. Drills up to grade 8 and 10.9 class fasteners.

Drill-out is a drill-bit and extractor in one tool. Drill-out incorporates a unique interaction between drill bit and extractor resulting in maximum impact and break out ability. Serrated extracting end of tool results in greater torque for hard to remove bolts.

Features:

• Unique drill tip allows tool to stay on center.
• Self centering drill tip eliminates walking or wandering.
• No grinding, center punching, or pilot hole required.
• Works on jagged, uneven, and rough breaks.
• Tempered twice for extra hardness; results in multiple extractions per tool.
• Made from M2 HSS. Highest quality steel used and made in the USA.

Specifications:

The above Drill-Outs are special left handed drill bits with unique extractor collet, conveniently used with any reversible power drill.

See all Alden Grabit Drill-Out Broken-Bolt Extractors