Flexbar Latheguard, Large – 13064

Prevent Accidents With LATHEGUARD
Clear LEXAN, Semi-Circular Wrap-a-round Guards

• Heavy Duty Cast Mounting bracket supplied
• Heavy Duty Chrome-plated extension tube and hardware
• Ready to mount; all you do is affix mounting bracket with two screws
• Back of shield is reinforced with plated wire-form housing
• Locks in swing away or functional positions
• Accepts 3 or 4-Jaw Chucks
• Rib reinforced
• Robust construction
• Light in weight
• Swings away easily

Information and Specifications:

HINTS, FOR SELECTING THE CORRECT LATHEGUARD!

1. The Chuck Diameter being used on your Lathe makes for a good formula
2. Utilize Dimension “A” and other dimensions on chart shown on page 5 of our Safety Brochure.
3. On Lathes with center heights of 7 inches or more there is a significant variation in the diameter of a 3-Jaw as against a 4-Jaw Chuck. It may be necessary to install the next larger Latheguard to accommodate for the 4-Jaw Chuck. Keeping a double bracket (No. 13071) on the Lathe makes it possible to switch your latheguard from small to larger size and vice versa, in one minute.

NEITHER RAZOR-SHARP CHIPS NOR BROKEN TOOLS BITS WILL PENETRATE THE LEXAN SHIELD

LARGE Model No. 13064 suggested Lathe size is 20 to 24 for use with Chucks up to 20″ Diameters.

• Shield Width: 8″
• Shield Length: 23.6″
• Tube Length: 13″

Specifications:

See all Flexbar Latheguards