Indexable Face Mill, 4″ Diameter

6-954-040

APX-D4.00-1.25-8-16. 4in 90 Arbor Mounted Face Mill for APKT 16 Inserts

RH Cut

• New single design.
• Great effiency.
• Cutters are provided with Torx Key, set of Locking Screws, 1 Arbor screw and 1 Hex Key.

Tool Angles:

Cutting Rake Angle: 12 degrees to -6 degrees
Radial Rake Angle: -12 degrees to -6 degrees
Axial Rake Angle: 7 degrees to 10 degrees
Setting Angle: 90 degrees

Uses All Standard Shell Mill Arbors

Technical Data:

Diameter D 4″ Arbor Hole d 1.25″ Height H 1.969″ Depth of Cut a 0.625″ No. of Inserts 8 Insert APKT 1604 Tolerances Tolerance: D = mm +/-0.65 mm Tolerance: d = mm +0.018/-0.0 mm Tolerance: H = mm +/-0.15 mm Spare Parts Torx Key T15 6-998-015 Insert Screw 6-998-4011 Anti Seize Lube 290-ASEIZE-03

See all Indexable Face Mills