Cameron Micro Drill Press New 214 Series
The New Cameron 214 series was designed with our customers in mind. By adding the new sealed motor with variable speed controller and the redesigned spindle assembly we made the Cameron 214 series easier to use and maintain.
The purpose of the redesigned spindle assembly on the Cameron 214 series is to allow our customers to easily change out the spindle for replacement when necessary without having to return the unit to Cameron for replacement and service.
The new Cameron 214 series motor and drive allows for more constant speed control with higher torque ratings specifically in the low rpm range, when drilling and doing light milling.
Standard Features:
- 1/7th HP heavy duty DC motor
- Variable speed control unit (5 amp / 115 VAC) maintains speeds from 1000-30,000 RPM
- Interchangeable spindle with linear sealed bearings for quick and easy spindle change. (No longer needs oiling)
- Smooth Rack and Pinion Feed
- Drills Small Holes (0.002 TO 5/32)
- Can Drill to the Center of a 5 Work Piece
- Spindle Run Out at the Chuck Mounting Taper is within 0.0002
- Clear Plastic Safety Guard
- Slotted 4 x 4 work table with 5/8 center hole
- J0 Taper
Specifications:
| Height With Depth Indicator |
17″ |
| Width |
5-1/4″ |
| Depth |
11″ |
| Chuck to Adjustable Table |
5-3/4″ |
| Chuck to Base |
7″ |
| Spindle Feed Travel |
1-1/4″ |
| Center To Column |
2-1/2″ |
| Table Size With Clamping Slots |
4″ x 4″ |
| Table Center Hole |
5/8″ |
| Drill Size |
0 – 5/32″ |
| Hole Size (varies with chuck size) |
.002″ – 5/32″ |
| Chuck Spindle Runout at Mounting Taper |
Within .0002″ |
| Weight / Shipping Weight |
9 lbs. / 12 lbs. |
View PDF Flyer
View Instruction Sheet
View Bodine Controller Spec Sheet
Reviews
There are no reviews yet.