The design has been updated and simplified from the traditional belt driven sander. Both the belt & disc functions are powered directly from the motor shaft. The disc sander side has a 150mm diameter disc complimented by a solid one piece aluminium work table with 45 degree tilt. The sanding belt can be used in horizontal or vertical mode. It can also be locked at any angle in between, sometimes more comfortable for sharpening tools. The open drum end of the belt can be used for sanding curved edges, cut on a bandsaw or scroll saw. Supplied with mitre fence, 1 x 80 grit sanding belt, 1 x 80 grit self adhesive sanding disc, 1.9m power cable & UK 3 pin plug., Manufacturer: Charnwood