Etch-O-Matic Electric Metal Marking System

ETCHES MARK INTO SURFACE ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003″ of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16″ Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part.

ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today! Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

Most Marks will Compare Favorably withLaser Marks on Metal and are Easier and Sometimes Even Faster to Make. In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often inCommerce Today.If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic. In fact, we have Marks in a Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle. (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

Etch-O-Matic Starter Kit

Lowest Priced Kit available Anywhere, Yet it Does the Job in Industry, in Plants, Machine Shops and Everywhere Metal Marking is needed. The Marker Unit is 10 volts, 2 amps and is Excellent for Light Duty Marking of Tools and Parts.(Transformer is inside marker unit)
KIT CONTAINS: ETCH-O-MATIC marker with standard head marking size ⁷/₈“x1³/₄“, electrical cord, ground plate, 2 oz. Electrolyte solution in plastic bottle, 10 special stencils, neutralizer, deep etching adapter clip and complete instructions. Each kit will make approximately 1,000 marks before refill supplies are needed.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

Etch-O-Matic Super Kit

NEW SUPER ETCH-O-MATIC is a Powerful, 15-Volt, 10-Amp, Heavy Duty, Industrial Quality Marking System that can Stand Up to Continuous Duty, Production Line Marking. It can make Fast A.C. Marks, then Change Instantly to Deep Etch Marking Down to .003″ Deep. It can make Large Marks 2″ x 4″ or Larger (with optional purchase of Medium or Large Grid Kits) for Trademarks or Etch Hard-to-Mark Coatings like Black Oxide Quickly. This is a Solid, “No Frills” Etcher that is Priced $200 to $300 BELOW Similar Kits on the Market Today.

KIT CONTAINS: 1 – 15-volt, 10-amp. marker unit with external transformer; adapter clip for deep etch marking; ground plate; 8-oz. general purpose electrolyte; 8-oz. neutralizer; extra pads; 100 pak special stencils; complete instructions and packed in sturdy plastic carrying case.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

Etch-O-Matic Super Industrial Kit – EOM-SIK

THE NEW SUPER ETCH-O-MATIC INDUSTRIAL KIT Combines the Best of Both of the TWO Kits Above and gives You enough Supplies to Mark Almost Any Type of Metal in the Average Plant. It also provides Great Value Because You get the Starter Kit 10-volt / 2-amp Unit Included FREE in the Kit. Also Included is a Large 2″ x 4″ Grid that Allows You to Mark Much Larger Areas at the Same Time. THIS IS REALLY A SUPER VALUE AT THIS LOW PRICE!

KIT CONTAINS: 1 Super and 1 Regular ETCH-O-MATIC marker along with an adapter clip for deep etch marking, ground plate, 8 oz general purpose and stainless steel electrolyte, two (2) 100 paks stencils, 4 oz. of aluminum, black oxide, and brass, copper & bronze electrolyte, 1 large 2″ x 4″ grid with stencils and pads to fit, 8 oz. neutralizer, 2 neutralizer powder paks, 1 extra regular grid and complete instructions.

Unit is 110 Volts standard, but is available in 220 volts for $20 more.

Super Industrial Kit Contents:

• 1 Starter Unit
• 1 Super Unit
• 1 Ground Plate
• 1 8oz Neutralizer
• 1 8oz General Purpose Electrolyte
• 1 8oz Stainless Steel Electrolyte
• 1 4oz Aluminum Electrolyte
• 1 4oz Black Oxide Electrolyte
• 1 4oz Brass/Copper/Bronze Electrolyte
• 1 Powder Pack Neutralizer
• 1 100 Pack Regular Stencils
• 1 Adapter Clip (Regular)
• 1 Adapter Clip (Super)
• 1 Pad/Grid Kit
• 1 Large Grid Kit
• 1 Medium Grid Kit
• 1 Instruction Sheet
• In Black Carrying Case Lined With Foam