Evo-Stik Floor & Wall Tile Adhesive Fast Set is a high-performance, rapid-setting adhesive designed for bonding tiles to a wide range of surfaces. Its fast-setting formula allows for light foot traffic within two hours, making it ideal for quick and efficient installations. This versatile adhesive is suitable for both interior and exterior use, including areas exposed to moisture and temperature changes.

It provides excellent adhesion to concrete, wood, plaster, and plasterboard, and is compatible with most domestic underfloor heating systems. Its waterproof and frost-resistant properties make it suitable for use in kitchens, bathrooms, and outdoor areas.

Product Details:

Key Features and Benefits:

• Rapid Setting:
  Allows for foot traffic after two hours, enabling quick project completion.
• Versatile Application:
  Suitable for use on concrete, wood, plaster, and plasterboard.
• Strong and Durable Bond:
  Provides a high-strength adhesive bond that withstands heavy use and movement.
• Waterproof and Frost Resistant:
  Suitable for wet areas such as bathrooms and outdoor installations.
• Compatible with Underfloor Heating:
  Safe for use with most domestic underfloor heating systems.
• Interior and Exterior Use:
  Designed for a wide range of tiling applications, both indoors and outdoors.

Suitable Materials:

• Ceramic tiles
• Porcelain tiles
• Natural stone
• Quarry tiles
• Slate
• Granite
• Terrazzo
• Vinyl tiles

Suitable Applications:

• Kitchen walls and floors
• Bathroom walls and floors
• Shower enclosures
• Hallways and living areas
• Outdoor patios and terraces
• Wet rooms
• Over underfloor heating systems

Coverage:

Directions for Use:

1. Surface Preparation:

• Ensure the surface is clean, dry, and free from dust, grease, and debris.
• Porous surfaces should be primed with diluted adhesive (1 part adhesive to 4 parts water) and allowed to dry before application.
• Allow newly laid concrete or plaster to cure fully before applying the adhesive.

2. Mixing:

• Gradually add the adhesive powder to clean water (approximately 5 litres of water per 20kg of adhesive).
• Mix until a smooth, lump-free consistency is achieved.
• Allow the mixture to stand for 2 minutes, then remix before use.

3. Application:

• Spread the adhesive evenly using a notched trowel.
• Apply the adhesive to an area no larger than can be tiled within 10 minutes.
• Position the tiles firmly into place with a slight twisting motion to ensure full adhesive contact.

4. Drying Time:

• Initial set: 2 hours
• Full strength: 24 hours
• Grouting can be done after 24 hours

Frequently Asked Questions (FAQ):

1. How long does Evo-Stik Floor & Wall Tile Adhesive Fast Set take to dry?
It sets in 2 hours for light foot traffic and reaches full strength in 24 hours.

2. Can it be used for wall and floor tiling?
Yes, its suitable for both wall and floor tiles.

3. Is it suitable for exterior use?
Yes, its waterproof and frost-resistant, making it ideal for outdoor tiling projects.

4. Can it be used with underfloor heating?
Yes, its compatible with most domestic underfloor heating systems.

5. Can it be used in wet areas like showers?
Yes, its waterproof and suitable for use in showers and wet rooms.

6. Is it suitable for large format tiles?
Yes, but ensure that the adhesive is applied evenly, and the tiles are adequately supported during setting.

7. Can it bond to wood and plasterboard?
Yes, it provides excellent adhesion to wood and plasterboard.

8. How much adhesive is needed per m?
Approximately 3.5m per 10kg, depending on the surface and adhesive bed thickness.

Storage and Handling:

• Store in a cool, dry place between 5C and 25C.
• Keep the container tightly sealed when not in use.
• Protect from frost and direct sunlight.
• Use within 12 months of purchase.

Safety Information:

• Keep out of reach of children.
• Avoid contact with skin and eyes.
• In case of contact with eyes, rinse thoroughly with water and seek medical advice.
• Use in a well-ventilated area.

Warranty:

Evo-Stik Floor & Wall Tile Adhesive Fast Set is backed by a 12-month performance guarantee. If the product fails to perform as specified under normal use conditions, a replacement or refund will be provided upon proof of purchase.

Evo-Stik Floor & Wall Tile Adhesive Fast Set Fast, Strong, and Reliable for All Your Tiling Needs.