Mitutoyo Bench-Top Type Laser Scan Micrometer LSM-9506 with Display

Series 544-Bench Top Type Non-contact Measuring System

Optional Accessories:

• 02AGD170 – Calibration gage set (1.0mm, 60mm)
• 02AGD680 – Adjustable Workstage
• 02AGD580 – Center support**
• 02AGD590 – Adjustable V-block**
• 936937 – SPC output cable (1m)
• 937179T – Footswitch
• 264-012-10 – USB Input Tool for spreadsheets (SPC cable also required)

** Use with an adjustable workstage.

1. ** Determined by the value for 2 at the measurement interval of 0.32 sec.
2. ** At the center of the measuring region
3. ** An error due to workpiece shift either in the optical axis direction or in the scanning direction. L= Distance between the center of workpiece and the center of optical axis (in mm or inches)
4. ** The area given by “measuring range on the optical axis” x “measuring range in the scanning direction”
5. ** FDA Class II (544-116-1A) semiconductor laser for scanning (Maximum power: 1.0mW)

QUICKTOOL is a free software program that makes programming the LSM-6200 quick and easy. Basic data acquisition is also possible. Included as standard accessory. (Connecting cables to PC are optional)

Specifications:

The optical axis direction
.0001in (2.5m)

The scanning direction
(.00008+L/10000)in [L:inch] (*3)
(2.0+L/10)m [L:mm] (*3) Positional error*3 (optical axis/scanning direction) 2.5m (.0001″)
L: Displacement between workpiece center and optical axis center Measuring Area*4 0.02 – 2.36″ / 5 – 60mm Scanning Rate 1600 per sec Laser wavelength 650nm (Visible)*5 Laser scanning speed 226m/s (8900″ / s) Display Unit 16-digit dot matrix (upper column) + 7 segment 11-digit (lower column),guidance LEDs Standard interface RS-232C, Digimatic code output unit (1ch) Optional interface No Data Output RS-232C,VO Analog Interface,SPC Power Supply AC100V to 240V, 50/60Hz, 40VA Operating Enviorment 0 to 40C, RH 35 to 85% (no condensation)

View all of the Optional Accessories for Laser Scan Micrometers