Rustins Textured Step & Tile Paint is a high-quality, durable coating specially formulated for protecting concrete, stone, and masonry surfaces such as steps, tiles, paths, and porches. Its textured, anti-slip finish improves safety in outdoor and indoor environments, making it an excellent choice for areas prone to moisture or frequent foot traffic.

Key Features & Benefits:

• Durable & Hard-Wearing:
  Formulated to withstand heavy foot traffic and outdoor weather conditions.
• Anti-Slip Textured Finish:
  The fine texture in the paint provides increased grip, reducing the risk of slipping, especially in wet conditions.
• Multi-Surface Application:
  Suitable for use on concrete, stone, brick, and other masonry surfaces.
• Weather-Resistant:
  Excellent resistance to rain, sun, and temperature changes, maintaining its appearance and performance over time.

• Quick Drying:
  Touch dry in approximately 2-4 hours under normal conditions, allowing for faster project completion.

• Available Colours:
  Usually available in classic shades such as Black and Tile Red to complement exterior and garden areas. (Please confirm specific colours available for your product.)

Specifications:

Feature Detail Product Type Anti-slip masonry paint Finish Textured / Semi-matt Base Solvent-based Application Method Brush or roller Drying Time Touch dry in 2-4 hours; recoat in 16 hours Coverage Approx. 8-10m per litre (varies with surface porosity) Boxed Weight 655g Recommended Coats 2 Suitable For Concrete, stone, tiles, brick, masonry Indoor / Outdoor Use Both Clean-Up White spirit or brush cleaner

Application Instructions:

1. Surface Preparation:

2. Ensure the surface is clean, dry, and free from loose paint, dust, oil, grease, or other contaminants.
3. Remove any existing flaky coatings.
4. New concrete should be allowed to cure for at least 3 months before painting.
5. Application:

   • Stir thoroughly before and during use.

   • Apply using a brush or roller for an even textured finish.

   • For best results, apply two coats, allowing the first coat to dry fully before applying the second.

6. Drying Time:

• Touch dry in 2-4 hours (depending on temperature and humidity).
• Recoat after 16 hours.
• Full hardness achieved after several days.

1. Clean-Up:

   • Clean brushes and equipment immediately after use with white spirit or a suitable solvent.

Ideal Applications:

• Concrete and stone steps
• Pathways and patios
• Garden tiles
• Porch floors
• Stairways
• Outdoor landings

FAQs:

• Q1: Can I apply this paint to ceramic tiles?
  A: No, it is designed for porous surfaces like concrete, stone, and masonry, not glazed ceramic tiles.
• Q2: How long before I can walk on the surface?
  A: Light foot traffic is possible after 16-24 hours; however, allow several days for full cure, especially in cooler or damp conditions.
• Q3: Can this be applied indoors?
  A: Yes, but ensure the area is well-ventilated during application and drying.
• Q4: Is this suitable for driveways or vehicle traffic?
  A: No, this paint is not formulated to withstand the wear from vehicles. It is intended for pedestrian use only.

Safety & Storage Information:

• Use only in well-ventilated areas.
• Keep away from sources of ignition.
• Store in a cool, dry place, away from direct sunlight.
• Keep out of reach of children and pets.
• Dispose of contents/container in accordance with local regulations.

Warranty Information:

Rustins products are made to meet strict quality standards. When used as directed, this paint helps protect and enhance the appearance of masonry surfaces. For technical advice or support, contact Rustins customer service.