Servo Standard Drill Press, Chuck Spindle, 12″ Column – 7000-I

For laboratory, prototype and precision production work. Available in chuck and collet models, 12″ or 19″ column, and inch or metric calibration.

Features:

• Inch and Metric versions
• Drill holes down to 0.002 / 0.05mm Dia.
• Spindle runout: 0.0002″ / 0.005 mm TIR
• High accuracy down stop for drilling depth control (0.001 / 0.05mm per division)
• Variable speed spindle (200-20,000 RPM)
• Quill travel (stroke): 1.5 / 38.1mm
• Keyless Albrecht chuck versions for quick and easy drill change;
  standard 0-1/8″ / 0-3 mm; optional 0-1/16″ / 0-1.5 mm
• WW collet versions for less run out and improved accuracy;
  0.0039″-0.252″ / 0.1-6.4 mm collet sizes available
• Graduated dial gauge for depth control
  (0.001 / 0.05mm per division)
• Wide selection of bases and accessories
• Drill capacity: to 1/16″ in inconel
  to 1/8″ in steel
  to 3/16″ in aluminum (collet only)
• Electrical: 115 volts AC, 50/60 Hz, 2 amps
  (220V/115V transformer available)

Standard

Unique Offset Column

Elbow & Deep Throat

Specifications:

I=Inch;
M=Metric
[ ] = See drawings 7000-I Chuck or collet Chuck Maximum distance of
chuck/collet to base[a] 6″
152 mm Throat depth [b]
(spindle CL to column) 3.5″
89 mm Working base area
(width) [c] 6.5″
165 mm Working base area
(depth) [d] 6.5″
152 mm Column diameter
through head [e] 1.25″
31 mm Column diameter
through elbow [f] –
– Column length [g] 12″
305 mm Footprint width 7.15″
181 mm Footprint depth 11.8″
299 mm Overall height 18″
457 mm Weight 21 lbs.
9.5 kg Base Fine grain, ground cast iron base

See all Servo Standard Drill Presses